| PART |
Description |
Maker |
| AND8090 AND8090D MC100H601 MC100H601FN MC10H106FN |
3.3V / 5V ECL Quad 2-Input Differential AND/NAND
5V ECL Low Impedance Driver
LOW VOLTAGE DUAL 1:4, 1:5 DIFFERENTIAL FANOUT BUFFER
8 Input Priority Encoder
3.3V ECL Triple D-Type Flip-Flop with Set and Reset
3.3V / 5V ECL Quad D Flip Flop with Set, Reset, and Differential Clock
3.3V Dual Differential LVPECL to LVTTL Translator
3.3V / 5V ECL 6-Bit Differential Register with Master Reset
3.3V ECL 1:15 Differential ÷1/÷2 Clock Driver
Fibre Channel Coaxial Cable Driver and Loop Resillency Circuit
3.3 V 1:9 Differential HSTL/PECL to HSTL Clock Driver with LVTTL Clock Select and Enable
3.3V / 5V ECL 8-Bit Synchronous Binary Up Counter
2.5 V/3.3 V SiGe Selectable Differential Clock and Data D Flip-Flop/Clock Divider with Reset and OLS
3.3V / 5V Programmable PLL Synthesized Clock Generator (25 to 400 MHz)
2.5 V/3.3 V SiGe 1:2 Differential Clock Driver with RSECL Outputs
2.5 V/3.3 V SiGe 1:10 Differential Clock Driver with RSECL Outputs
Triple 4-3-3-Input NOR Gate
9-Bit ECL-TTL Translator
AC Characteristics of ECL Devices
|
Motorola
ONSEMI[ON Semiconductor]
|
| MC10EP29MNTXG |
3.3V / 5V ECL Dual Differential Data and Clock D Flip−Flop With Set and Reset 10E SERIES, DUAL POSITIVE EDGE TRIGGERED D FLIP-FLOP, COMPLEMENTARY OUTPUT, QCC20
|
ON Semiconductor
|
| MC100LVEL29DWR2 |
3.3V ECL Dual Differential Data and Clock D Flip−Flop With Set and Reset 100LVEL SERIES, DUAL POSITIVE EDGE TRIGGERED D FLIP-FLOP, COMPLEMENTARY OUTPUT, PDSO20
|
ON Semiconductor
|
| MC100EL31D MC100EL31DG MC100EL31DR2 MC100EL31DR2G |
5 V ECL D Flip-Flop With Set and Reset
|
ONSEMI[ON Semiconductor]
|
| AZ10EL31T AZ100EL31 AZ100EL31D AZ100EL31T AZ10EL31 |
ECL/PECL D Flip-Flop with Set and Reset
|
AZM[Arizona Microtek, Inc]
|
| MC100LVEL30DW MC100LVEL30DWG MC100LVEL30DWR2 MC100 |
3.3V ECL Triple D Flip−Flop with Set and Reset
|
ONSEMI[ON Semiconductor]
|
| MC100LVEL29-D |
3.3V ECL Dual Differential Data and Clock D Flip-Flop With Set and Reset
|
ON Semiconductor
|
| MC10H109FNR2 MC10H131 MC100EP140 MC100E155FN MC100 |
Dual 4-5-Input OR/NOR Gate
Dual Type D Master-Slave Flip-Flop
3.3V ECL Phase-Frequency Detector
5V ECL 6-Bit 2:1 Mux Latch
5V ECL Differential Data and Clock D Flip-Flop
3.3 V 1:9 Differential HSTL/PECL to HSTL Clock Driver with LVTTL Clock Select and Enable
3.3V ECL 1:15 Differential ÷1/÷2 Clock Driver
ECL/TTL Clock Driver
3.3V / 5V 2-Input Differential AND/NAND
5V ECL 2:1 Multiplexer
3.3V / 5V ECL JK Flip Flop
3.3V ECL 1:4 ÷ 1/÷ 2 Clock Fanout Buffer
3.3V / 5V Hex Differential Line Receiver / Driver
3.3V 10-bit LVTTL/LVCMOS to LVPECL Translator
Dual 2-Bit Adder/Subtractor
|
ON Semiconductor
|
| HCTS74KTR HCTS74T HCTS74DTR |
DUAL RETRIGGERABLE MONOSTABLE MULTIVIBRATORS 20-LCCC -55 to 125
Radiation Hardened Dual-D Flip-Flop with
Set and Reset(抗辐射双D触发器（带置位、复位）)
Radiation Hardened Dual-D Flip-Flop with Set and Reset
HCT SERIES, DUAL POSITIVE EDGE TRIGGERED D FLIP-FLOP, COMPLEMENTARY OUTPUT, CDIP14
|
Intersil Corporation
|
| 74HC74DR2 74HC74DR2G 74HC74D 74HC74 74HC74DTR2G 74 |
Dual D Flip−Flop with Set and Reset High−Performance Silicon−Gate CMOS
Dual D Flip-Flop with Set and Reset(带设置和复位的双D触发 双D触发器的设置和复位（带设置和复位的双触发器）
|
ONSEMI[ON Semiconductor]
|
| 74AUP1G74GT-G 74AUP1G74GF |
Low-power D-type flip-flop with set and reset; positive-edge trigger AUP/ULP/V SERIES, POSITIVE EDGE TRIGGERED D FLIP-FLOP, COMPLEMENTARY OUTPUT, PDSO8
|
NXP Semiconductors N.V.
|
| SY10EL31ZG SY10EL31ZITR SY10EL3105 SY10EL31ZGTR SY |
D FLIP-FLOP WITH SET AND RESET
|
MICREL[Micrel Semiconductor]
|
